Make your own free website on


  How to improve the berg...


Oil Breather  (by
Freek Knol)

The problem with the original oilbreather is that there's always lot of oil at the air-intake side off the carb, with can cause bad starting and other carb problems

With this system a very little bit off oil comes in the carb. Use a wide section hose sice it works better. (download bigger images)

Fig 1: upper part (paintroller foam)

Fig 2: Hose routing

Send all your technical stuff and advice to this e-mail with clear instructions and if possible some pictures: 

web desing by: dctools
April 2000